Nvraid configuration, Onboard rtl giga lan [enabled, Onboard rtl giga lan boot rom [disabled – Asus P5ND2 SE User Manual
Page 78
2-32
Chapter 2: BIOS setup
NVRAID Configuration
This sub-menu contains NVRAID function-related items. Select an item then
press <Enter> to edit.
F1:Help
↑↓ : Select Item
-/+: Change Value F5: Setup Defaults
ESC: Exit
→←: Select Menu
Enter: Select Sub-menu
F10: Save and Exit
Select Menu
Item Specific Help
Disable/Enable NVIDIA
RAID feature.
Phoenix-Award BIOS CMOS Setup Utility
Advanced
NVRAID Configuration
RAID Enabled
[
Disabled
]
x SATA 1
Disabled
x SATA 2
Disabled
x SATA 3
Disabled
x SATA 4
Disabled
SATA2 DMA transfer [Enabled]
Allows you to enable or disable the SATA2 DMA transfer access.
Configuration options: [Disabled] [Enabled]
IDE Prefetch Mode [Enabled]
Allows you to enable or disable the IDE prefetch mode.
Configuration options: [Disabled] [Enabled]
RAID Enabled [Disabled]
Enables or disables the onboard RAID controller. When Enabled, the
succeeding items becomes user-configurable.
Configuration options: [Enabled] [Disabled]
First, Second, Third, Fourth SATA Master RAID [Disabled]
Enables or disables the RAID function of the first, second, third or
fourth SATA master drive. Configuration options: [Enabled] [Disabled]
Onboard Rtl Giga LAN [Enabled]
Enables or disables the onboard Rtl Giga LAN Interface.
Configuration options: [Disabled] [Enabled]
OnBoard Rtl Giga LAN Boot ROM [Disabled]
Allows you to enable or disable the bootrom of the onboard Rtl Giga LAN.
Configuration options: [Disabled] [Enabled]