Projecting from external video input source – AIPTEK PocketCinema N100 User Manual

Page 8

Advertising
background image

User’s Manual

Page 8

EN

Adjusting the Focus according to distance

Place the projector on a flat surface and
toward a wall or a projection screen. The
projectional distance and projectional size are:

Distance : 50 cm ~ 425 cm (20 ” ~ 167 ”)
Image size: 36 cm ~ 305 cm (14 ” ~ 120 ”)

Adjust the focus by turning the Focus Lever
upward or downward to get a sharp and clear
picture.

Note: Use a tripod (not included) to increase the height of the projectional image when

necessary. The tripod socket is located under the projector.




Projecting from External Video Input Source

The projector has built-in multiple interface on the rear side. You can connect your
external video Input source to the projector by using the appropriate cable and press
the Source key on the control panel of the projector to select the input source.

Advertising