AIPTEK SportyCam Z3 Manual - Manual (Page 14)

SportyCam Z3 e-Manual DA
www.aiptek.eu
Page 14
EN
Language: Set your preferred language
Frequency: Set the Light Source Frequency 50Hz or 60Hz depending on your area in
order to avoid flickering on your monitor or TV
Flicker settings reference:
Area England Germany France Italy Spain Russia
Setting 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz 50 Hz
Area Portugal America Taiwan China Japan Korea
Setting 50 Hz 50 Hz 60 Hz 60 Hz 50/60 Hz 50 Hz
Please note: The flicker setting is based on the frequency standard of your local
power supply.
Set date and time: Set the current time and date
Reset: If the camera stopped responding to key strokes, please resart the
device by shortly pressing the reset key with a small pentip
File Storage and Play
You can view all recordings directly on SportyCam Z3. It has a built-in TFT-display and
speaker.
1. To enter playback mode, press the Playback button ( ).
2. Playback Video / Voice files: Select “Record” if you want to view your video and voice
recordings. Set up the camera to Video Mode or Voice Mode before viewing the recordings.
3. Playback photos: Select “Capture” to view pictures.