Air Suspension A-2730 REV 1 - Manual (Page 8)

8
A- 2730
ARNOTT FRONT AIR SPRING
FOR 1997-2004 AUDI A 6 ( C 5)
FOR 1999-2005 AUDI A 6 ALLROAD QUATTRO ( C 5)
REV 1 12/11/2013 A-2730
2. REMOVE THE NEW O-RING FROM BAG AND LUBRICATE. INSTALL NEW O-RING INTO THE FACE GROOVE LOCATED
ON THE TOP SIDE OF THE AIR SPRING. REPLACE THE TOP WASHER, RUBBER MOUNT AND FLANGE NUT. (FIGURE M)
3. REPLACE THE CAST ALUMINUM SHOCK CAP AND INSTALL THE SIX (6) TOP MOUNTING BOLTS. (FIGURE N)
FIGURE M
FIGURE N
AIR STRUT INSTALLATION
1. INSTALLATION IS IN REVERSE ORDER OF AIR STRUT REMOVAL.
Tighten all nuts and bolts to manufacturer's specifications during the installation process.
Do not remove the air fitting from the air spring. Doing so may cause damage and/or void warranty. Remove the white
shipping pin from the new air fitting and insert the air line until fully seated.