Air Suspension A-2239 REV 4 - Manual (Page 6)

6 REV 4 11/05/2013 A-2239
A- 2239
ARNOTT FRONT AIR SPRING
FOR 1999-2005
AUDI ALLROAD
14. REMOVE AND DISCARD THE OLD O-RING USED TO SEAL THE AIR SPRING TO THE SHOCK. THIS O-RING WILL
NOT BE REUSED IN THE NEW ASSEMBLY. (FIGURE K)
AIR SPRING INSTALLATION
1. LUBRICATE THE O-RING IN THE BOTTOM OF THE NEW AIR SPRING ASSEMBLY, AND SLIDE THE NEW AIR SPRING
OVER THE SHOCK ABSORBER. (FIGURE L)
FIGURE K
FIGURE L
Tighten all nuts and bolts to manufacturer's specifications during the installation process.
Do not remove the air fitting from the air spring. Doing so may cause damage and/or void warranty. Remove the white
shipping pin from the new air fitting and insert the air line until fully seated.