Armasight DACCIPHBB01NTS1 Cipher Digital Night Vision Clip-on System - Manual (Page 22)

22
E
F
B
A
D
FIGURE 3-6. OPTIONAL FSRS SYSTEM. COMPONENT PARTS
C
G
I
H
B. Mounting the Day Scope
Figure 3-7 shows the day scope mounted to the FSRS system.
Mount the day scope to the FSRS system as follows:
1. Loosen the nuts (A, Figure 3-6). Install the mount (H) on the weapon’s Picatinny/ Weaver rail; the two
pins of the mount’s clamping device should be secured in the transverse slots of the rail. Manually
retighten the nuts (A).
NOTE :
Pay attention to the arrow engraved on the right side of the mount (H).
The arrow must be pointed towards the end of the weapon’s muzzle.
FIGURE 3-7. DAY SCOPE MOUNTED IN FSRS SYSTEM