Armasight DAMBIT05X05PAL1 BIT 5x Digital Night Vision Monocular - Manual (Page 19)

19
A
FIGURE 3-2. THE BIT FULLY ASSEMBLED WITH THE PLATFORM RING
A
B
C
C
D
FIGURE 3-3. PLATFORM RING
3.1.3 FASTENING AN ADVANCED WIRELESS REMOTE CONTROL
Using Velcro tape (A, Figure 3-4), fasten the remote control (B) in an easily accessible place.
If your equipment has a Picatinny or Weaver rail, you can use the Picatinny adaptor for the Advanced
Wireless Remote (C). Install the adaptor onto the rail (D). Insert the remote control unit into the adapter.
You can also install the Picatinny adaptor onto the Bit side rail or onto the platform ring.
FIGURE 3-4. ADVANCED WIRELESS REMOTE CONTROL
A
B
B
C
D
3.1.4 INSTALLING ADDITIONAL EqUIPMENT ON THE BIT
Use the side Picatinny/Weaver rail to install any additional equipment, such as the Armasight DT digital
video recorder (see Figure 3-5) or an external battery power supply.
Use the Platform Ring adapter to install any additional equipment, such as the long-range IR illumina-
tor. For adapter mounting procedures, see Part 3.1.2.