2 binoculars assembly – Armasight DAB10X42RF0ARM1 10x42 Binoculars User Manual

Page 9

Advertising
background image

9

3.2 bINOCULARS ASSEMbLY

Please assembly the binoculars belt before using, see Figure 2.

Be make sure to install the batteries into the binoculars if the binoculars need the power to illuminate
the compass (7x50C and 8x30C models). Two LR44 1.5V alcaline batteries used to power the 7x50C and

8x30C.
The batteries for the compass will be exhausted if the internal lighting system has been used long

periods of time. Batteries can also become weak if not used for a prolong period of time. If so, open the

battery cover and replace with fresh batteries.

CAUTION:

The two batteries should be replaced at the same time. The batteries should be taken out if the

binoculars will not be used for a long time. Batteries left in the binoculars for prolong periods

of time without being used may leak and cause damage to the binoculars.

Figure 2. Neck Strap Attaching

Figure 3. battery Installation (7x50C and 8x30C only)

Advertising