AVSL 151.577 LED DERBY III User Manual
Page 2
151.577UK User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Introduction
Thank you for choosing the QTX LED DERBY III quad colour multi-point effect as part of your lighting rig.
Please read these instructions in full to gain the best results from this item and avoid damage to the unit.
Unpacking
Your LED DERBY III should reach you in good condition and be supplied with appropriate mains lead(s)
and mounting bracket. If there are any signs of damage or items missing from the packaging, contact
your dealer immediately.
Warning
To prevent risk of fire or electric shock, do not expose any components to rain or moisture.
If liquids are spilled on the housing, disconnect mains and allow unit to dry out & have checked by
qualified personnel before further use. Avoid any impact or extreme pressure to the housing.
No user serviceable parts inside – Do not open the case – refer all servicing to qualified service personnel.
Safety
Check for correct voltage and condition of IEC lead before connecting to power outlet
Placement
Mount the unit to a lighting stand or ceiling using the adjustable bracket included
If the unit is mounted at height, a drop cable should be attached for safety
If free-standing, ensure that the unit is sited on a stable, non-slip surface
Ensure adequate access to controls and connections
Cleaning
Use a soft dry or slightly damp to clean the cabinet. Do not use strong solvents for cleaning the unit
For best results, clean the front optics periodically with a dry, lint-free cloth