AVSL 154.095 DM-X24 - Manual (Page 20)

Appendix: Quick operation
Manual operation
1) Connect to power, Press BLACK OUT and it Os yellow LED light OF
2) Move sliders of MASTER A and FADE to top.
3) Use MODE SELECT to select 1-24 SINGLE mode
4) Move sliders to change DMX value to control lighting fixture.
Program
1, Connect to power, Press BLACK OUT and it Os yellow LED light OF
2, Move sliders of MASTER A and FADE to top.
3, Use MODE SELECT to select 1-24 SINGLE mode
3.1 - Edit Scene
3.1.1: Keep pressing RECORD and press FLASH button 1-5-6-8 to ente
PROGRAM stat us. RECORD LED ON.
31 .2: Move sliders of channels to get suitable effect
3.1.3: Press RECORD to save current effect ( all LED lamps of slider area
will flash one time). LCD display bottom line show [STEP NO 001]
3.1.4: Repeat step 3.1.2 & 3.1.3 to program scene you need.
3.2 - Save scene to program slider:
3.2.1: Press PAGE to select program page -- total 1-4 pages, 12 program
sliders each page)
3.2.2: Keep pressing RECORD and correspond FLASH button of 13-24
sliders (all LED lamps of slider area will flash one time). Then current scene be
saved to selected program slider.
3.2.3: Repeat steps 3.1.2, 3.1.3, 3.1.4, 3.2.1, 3.2.2 to edit and save other
program sliders.
Run program
1, Press MODE SELECT to get CHHASE SCENES and select running mode
2, Press PAGE to select running program page.
3, Move sliders of correspondent running program channel (13-24) to top and it
Os yellow LED lamp ON
4, Move SPEED slider to set program FADE IN time.
5, Press PARK B to select SINGLE CHASE (- Recycle mode and it Os red LED
lamp ON) or MIX CHASE(- run all selected program at same time and it Os
yellow LED lamp light up)
.
DMX 512 CONTROLLER SERIES
19/19 USER MANUAL