AVSL 160.463 QTFX-900 mkII - Manual (Page 2)

160.463UK User Manual
Introduction
Thank you for choosing the QTFX-900 mkII as part of your stage effects system.
This machine is designed to provide generous fog output and reliable service for
medium sized venues. Please read these instructions fully to achieve the best results
and avoid damage through misuse.
Unpacking
Your QTFX-900 mkII should reach you in good condition and should be supplied with IEC
mains lead(s), mounting bracket, wireless controller with remote and wired handheld remote.
If there are any signs of damage or items missing from the packaging, contact your dealer
immediately.
Warning
To prevent risk of fire or electric shock, do not expose electrical parts to rain or moisture.
If liquids are spilled on the housing or through the vents, disconnect the mains, allow the
QTFX-900 mkII to dry out and have it checked by qualified personnel before further use.
Avoid any impact, dropping or extreme pressure to the housing.
No user serviceable parts inside - do not open the case.
Allow the QTFX-900 mkII to acclimatize to room temperature before operating.
Refer all servicing to qualified service personnel.
Placement
The QTFX-900 mkII has a built-in fluid tank and should be operated in an upright position.
If free-standing, ensure that the QTFX-900 mkII is positioned on a stable, non-slip surface.
If mounted at height, use the integral bracket and it is advisable to add a safety cable.
Safety
 Check for correct voltage and condition of IEC lead before connecting to power outlet
 Check the condition of the remote lead and ensure that it is not trapped
 This unit must be earthed
 This unit uses a heating element - do not touch the nozzle area whilst in use!
Cleaning
 Use a soft dry or slightly damp to clean the casing
 Do not use strong solvents for cleaning the unit
 It is recommended to use fog machine cleaning fluid (160.670UK) periodically