AVSL Citronic CV8A - Manual (Page 4)

CV series Active Speaker User Manual
Specifications
Model CV8A CV10A CV12A CV15A
Power supply 110-240Vac, 50/60Hz (IEC)
Flying Points 2 x M8 + 2 x rear hook points
LF driver 200mm (8“) 250mm (10“) 300mm (12“) 380mm (15“)
LF driver: Coil size 35mmØ 50mmØ 65mmØ 75mmØ
HF driver 38mmØ Ti 38mmØ Ti 62mmØ Ti 62mmØ Ti
HF driver: Coil size 25mmØ 25mmØ 44mmØ 44mmØ
Power rating: RMS 75W 150W 300W 400W
Power rating: Max 150W 300W 600W 800W
Crossover frequency 3.5kHz 3.5kHz 3.0kHz 2.5kHz
Frequency response 60Hz-20kHz 55Hz-20kHz 45Hz-20kHz 40Hz-20kHz
SPL @ 1W/1m 97dB 99dB 101dB 103dB
Max SPL 121dB 125dB 127dB 129dB
THD 0.10%
SNR 87dB
Dimensions (mm) 415 x 285 x 265 505 x 335 x 310 610 x 390 x 350 735 x 475 x 420
Weight (kg) 10.5 14.5 18.5 23.5
Troubleshooting
No output and no LEDs lit
Check POWER switch is on
Check mains lead is connected
Check mains fuse hasn’t blown
Power LED lit but no sound
from external inputs
Check leads are OK and connected properly
Check volume and on/off switch on external mic or line source
Check VOLUME control is not fully down
Distorted or overdriven
output
Ensure that a line level signal is not connected to MIC input
Reduce the VOLUME until the SIGNAL/CLIP indicator is lit green
Reduce BASS and TREBLE controls if set high
Output is too low
Ensure that a microphone is not connected via the LINE input
If SIGNAL/CLIP indicator is not showing red, increase VOLUME
IF BASS and TREBLE controls are set low, increase both controls
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or
Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life.
The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2013. AVSL Group Ltd.