AVSL Citronic CX34 - Manual (Page 2)

2 170.929UK, 170.932UK User Manual
Introduction
Thank you for choosing a Citronic active crossover. This product has been designed to give accurate
control for a multi-amplifier sound reinforcement system. In order to achieve the best results from
this equipment and avoid damage through misuse, please read and follow these instructions and
retain for future reference.
Warning
To prevent the risk of fire or electric shock, do not expose any part of the unit to rain or moisture.
If liquids are spilled on the surface, stop using immediately, allow unit to dry out and have checked
by qualified personnel before further use.
Avoid impact, extreme pressure or heavy vibration to the unit.
There are no user serviceable parts inside the crossover – refer all servicing to qualified service
personnel.
Safety
 Check that the supplied mains lead is in good condition and the supply voltage is correct.
 Ensure signal leads are of good condition and connected to appropriate inputs/outputs
 Do not allow any foreign particles to enter the console through control apertures or connector
apertures
Placement
 Keep out of direct sunlight and away from heat sources.
 Keep away from damp or dusty environments.
 When rack-mounting, avoid placing heavy units above the unit and ensure all connectors are
accessible
Cleaning
 Use a soft cloth with a neutral detergent to clean the casing as required
 Use a soft brush to clear debris from the control surface
 Do not use strong solvents for cleaning the unit.