Babyliss SL31 Electronic Monitoring Scale - Manual (Page 12)

-  -
PROGRAMMING
You can program the Monitoring scale very easily and
very quickly. All you need to do is enter your height
into the unit’s memory and that’s it! For every future
use, the scale will automatically recall this information
to calculate your body mass index.
Note: This unit records data for  users.
Caution: Every time you reprogram the user memory
(no.  or no. ), you replace the previously saved data.
• When the scale is off, press the button that corres-
ponds to the number of the user you wish to program
and hold for a few seconds. User  presses button ‘’
while user  presses button ‘’. You will hear a ‘beep’
which indicates that you are in ‘Programming’ mode.
• The number ‘’ will be displayed on the screen. It shows
you that you are in the session for user . The default
setting of 60cm (or the previously saved value) will
also appear for the height and will flash.
• Press on the up and down (‘’ or ‘’) buttons to select
your height. The numbers will scroll quickly if you hold
the button down. Once your height appears on the
screen, release the button for  seconds. Your height is
now saved. An audible beep confirms this.
• The scale shows your user number and displays ‘00.0
Kg’. It is ready to use.
Note: The scale turns itself off automatically
You have finished entering your personal data.
ERROR MESSAGES
The scale does not display your weight:
• The minimum measurable weight is  Kg.
The ‘err’ message may appear on your screen if:
• your weight exceeds the maximum measurable
weight 80Kg
• the difference in your weight since your last weighing
exceeds 9.9 Kg
• you stepped onto the scale before ’00.0’ appeared.