C2G 27386 2 Port USB 2.0 PC Card - Manual (Page 2)

2
Installation
Driver Installation for Windows Vista
1. Start power to RUN VISTA
2. Windows will automatically detect you have a new device the first time you power on
your PC and thus request the devices software drivers.
3. Detect you have device to Install device software
4. Install the driver “your device are ready to use”
5. Click “Device Manager” to “Universal Serial Bus Controllers” and the “VIA Rev 5 or
later USB Universal Host Controller” & ”VIA USB Enhanced Host Controller” should be
displayed when successfully installed. The port is ready to connect new device.