C2G 29573 WIRELESS VGA DEVICE ADAPTER - Manual (Page 31)

30
4. Enter the PIN of the Wireless VGA Adapter (4-digit PIN) and click Accept Association. The Wireless
VGA Adapter and Wireless USB Host Adapter are now associated and ready for operation.
P IN C HANGE P ROCEDURE
The default PIN setting for the Wireless VGA Device Adapter is “1234”. This section gives you the
instructions to change the PIN to another 4-Digit value.
IMPORTANT: The application used to change the PIN is not supported in Vista 64bit.
1. Make sure your Wireless USB host adapter and the Wireless VGA Device Adapter are not connected
to your computer.
2. Open/Launch the application “Pin Update” (C:\Program Files\Wireless USB
Manager\Utility\PINUpdate). The following dialog will appear:
A PPENDIX