C2G 29594 WIRELESS USB to AUDIO KIT - Manual (Page 25)

24
Figure: Cable Association
C ABLE A SSOCIATION P ROCEDURE
Cable association steps. Examples/Figures shown are used with the association of the TruLink Wireless
Audio Device Adapter (Part # 29595) when used with the TruLink Wireless USB Host Adapter (part
#29578). This process will vary by manufacturer of your Wireless USB host adapter.
1. Make sure that the Wireless USB host adapter utility is running. Check your Windows tray for the
Wireless USB Manager icon (Figure: Wireless USB Manager).
2. Plug in the power adapter for your TruLink Wireless Audio Device Adapter.
3. Connect the USB cable between an available USB port on your computer and your Wireless Audio
Device Adapter.
4. Complete cable association by pressing the “Accept Association” button when prompted (Figure: Cable
Association).
5. Remove the USB cable from your Wireless USB Audio Device Adapter and computer.
A PPENDIX