C2G 30535 USB 2.0 TO DVI-I ADAPTER User Manual
Page 28
27
Step 6
I
NSTALLATION OF
S
INGLE
USB
2.0
TO
DVI-I
A
DAPTER
Please select “Yes, I want to restart my computer now.”
and click “Finish” to complete the driver installation. Note: If
you wish to install additional USB 2.0 to DVI Adapters, select
No, I will restart my computer later, and refer to Step 8 on the
next page.
After you reboot the computer, you should see the extend
display on the 2
nd
display device.
Step 7
Connect the external display device (monitor/projector) to the DVI connector of USB 2.0 to DVI-I
Adapter and switch it on. Then, plug the USB 2.0 to DVI-I Adapter into an available USB 2.0 port of
your PC or notebook and you are ready to use. Refer to page 11 for the application diagram. By default
this adapter will set the additional monitor as an “extended desktop” display. To change the setting of the
display output, please refer to the user manual which is located on the disc.
D
EVICE
I
NSTALLATION ON
W
INDOWS
®
V
ISTA
®