C2G 39985 VGA W_AUDIO OVER CAT5 EXTENDER - Manual (Page 9)

8
Step 7
Connect the Extender Remote Unit HD15 female connector with a HD15 cable to your monitor.
Step 8
Connect the Extender Remote Unit Audio Output connector with an audio cable to the monitor or audio
receiver.
Step 9
Connect the Extender Base and Remote Unit power adapters
Step 10
Turn on your PC, monitors, and other equipment, and your installation is complete!
Note: Cat6 cables can be used but not recommended due to the skew of the signal pairs.
D EVICE I NSTALLATION