C2G 39971 TruLink VGA Switcher_Extender w_Audio - Manual (Page 4)

1
Features:
• Display video output from up to two or four computers on a single monitor or projector
• PC selection via push buttons or IR remote control
• IR remote control allows you to switch outputs from up to 6 feet away
• Support Daisy-chain to expand the number of computers connection up to 3 layers.
• Enhance video signal enhancement allows monitor to be placed up to 210 feet away
• Supports video resolutions up to 2048x1536
• Suitable for VGA, SVGA, XGA, SXGA, UXGA, and Multi-sync monitors
Connecting the VGA Switcher/Extender
Examples in this manual will be with reference to product 39971.
Before you make any connections, you will need at least one VGA (HD15) male to male cable to
connect from the switch to the monitor. You will also need up to four VGA/3.5mm audio cables to
connect from your PCs to the switch.
1. Using a VGA cable connect your monitor or projector to the Monitor output on the switch. If
you are using audio, connect your PC speakers to the related Audio output on the switch.
2
Connect your VGA cables from the PC inputs on the switch to VGA outputs on your PC.
Also, connect your PC sound card to the Audio inputs using a 3.5mm audio cable.
3. Connect provided power supply to the switch and to an outlet.
Front of 39971