C2G 29505 WIRELESS DIGITAL SIGNAGE DISTRIBUTION SYSTEM - Manual (Page 6)

5
The WDSDS is specially engineered to provide maximum flexibility by distributing digital
content via two different modes.
Wireless Mode: The solution can be configured in wireless mode using 802.11a/g
capabilities to send content 100+ feet and support up to 32 screens in locations where
installing cable is difficult or costly. This is ideal for smaller scale digital signage
installations where convenience, low cost and ease of use are the primary factors in
selecting a solution.
Wired Mode:
The solution can also be set to run in an Ethernet configuration on its
own network. This mode accommodates up to 1,000 screens over a distance of 3,000
feet using standard Cat5/6 cables and existing network equipment (hubs, switches, or
routers).
Because the transmitter distributes data only to the network to which
receivers are connected, the signal does not interfere with other networks and overall
network traffic is reduced. This is perfect for the most complex digital signage
applications where monitors need to be placed long distances from the media player.
S YSTEM F EATURES
• The WDSDS supports resolutions up to 1280x1024 @20fps or 1024x768 at 30fps and
contains an integrated “Lip-Sync” function that keeps the video and audio signals in
sync with one another across all displays. A web-based software application allows
users to manage all transmitters and receivers remotely. This includes the ability to
view critical data such as connection rates and link status, as well as perform
administrator tasks such as configuring, rebooting, or setting custom screens, from
anywhere on the network.
Supports Wired LAN (10Base-T/100Base-TX) and Wireless
LAN (IEEE802.11a/g: Infrastructure/Ad hoc mode)
• Uses standard Ethernet network infrastructure allowing digital signs to be connected
using network cabling and equipment that is already installed in a building*
• Plug-and-play functionality allows the transmitter and receivers to automatically detect
one another making installation and setup quick and easy
• DVI-I connectors on the transmitter and receivers allow analog (VGA) or digital
connections (DVI or HDMI) for maximum flexibility
• RS-232 port on receivers allow for additional control of the connected displays
• Flexible external antenna connectors allow for multiple antenna options and placement
to meet your application.
2. P
RODUCT
O
VERVIEW