C2G 52064 Single Port KVM over IP User Manual
Page 20
Single Port KVM over IP
18 / 88
Step 7
Connect one end to PS/2 keyboard port on the computer, and the other end to the host
PS/2 keyboard port on the IP-KVM switch.
Step 8 (Option)
Connect the type A connector of USB A-B cable to the USB port of the host system, while
using remote mass storage control. USB type A plug of USB A-B cable to the computer.
Step 9
Connect Ethernet and/or modem or both communication ports simultaneously, depending
on how you want to access IP-KVM switch
Note: - One serial device like modem or serial power can be used simultaneously.
Step 10 (Option)
Connect serial power device to serial port for remote power control integrated with Web
user interface if IP-KVM switch
Note: - Before attempting to connect anything to the IP-KVM switch or your computers,
please ensure that all your computers and devices are power off.
INTERNET
Modem