C2G 28652 USB 2.0 LAPTOP DOCKING STATION WITH VIDEO User Manual
Page 22
21
Step 1
Make sure that the HyperTerminal is installed in your system. If not, please go to Start, Settings, and
Control Panel. Double click Add/Remove Programs, choose Windows Setup Page, Communications,
click Details button and enable HyperTerminal to install the program to your Window system.
Step 2
Go to Start, Settings, Control Panel, double click System, and click on Device Manager. Check which
COM port is located by USB to Serial Port.
Step 3
If you have setup HyperTerminal before, please go to Start,
Programs, Accessories, Communications, HyperTerminal.
Click File and choose Properties. The Properties dialog page will
appear on your screen. If it is your first time to setup
HyperTerminal, you will see the following page during the setup
procedure.
Step 4
Click the Connect using item to indicate the proper COM port, which
appeared in Step 1. Follow the instructions to complete the setup.
S
ETTING
U
P THE
H
YPER
T
ERMINAL WITH
USB
TO
S
ERIAL
P
ORT