C2G 26630 10_100Base-TX to 100Base-TX Media Converter - Manual (Page 17)

10/100Base-TX to 100Base-FX Mini Converter
- 13 -
Connecting Copper Cable
The 10/100BASE-TX RJ-45 Ethernet port fully
supports auto-sensing and auto-negotiation.
1. Insert one end of a Category 3/4/5/5e type twisted
pair cable into an available RJ-45 port on the
Converter and the other end into the port of the
network node.
2. Check the corresponding port LED on the
Converter to be sure that the connection is valid.
(Refer to LED chart in next section)