C2G 35554 TruLink 2-Port VGA USB 2.0_PS2 KVM Switch - Manual (Page 17)

14
Hot Key Switch (PS/2 keyboards only, not available for USB keyboards)
[Scroll], [Scroll], [1]
or
[Scroll], [Scroll], [2]
Switch to PC1: Scroll Lock
+ Scroll Lock + [ 1 ]
Switch to PC2: Scroll Lock + Scroll Lock + [ 2 ]
Switch to upper host: Scroll Lock + Scroll Lock + ↑
Switch to next host: Scroll Lock + Scroll Lock + ↓
Auto Switch: Scroll Lock + Scroll Lock + [ H ]
Note: When using the two-step Hot Key sequences, the keys must be pressed within 3
seconds; otherwise the Hot Key action will be canceled. After pressing the Scroll key twice,
the Scroll LED will start blinking and wait for the Step 2 hotkey, after pressing any key or
over 3 seconds, the keyboard LED will switch back to the original status.
On-Screen-Display (OSD) Switch (Windows only)
Activate the OSD and click the port number on the OSD. The active host will
change to the indicated port.
Auto-Scan Function
Activate Autoscan
Press Scroll + Scroll + [S] to activate AutoScan Mode.
Disable Autoscan
Press any key excluding number keys [ 1 ], [ 2 ], [ 3 ] and [ 4 ] to turn off the AutoScan
Mode. The KVM will switch back to the original Host.
When you activate the Auto-Scan mode, the USB KVM Switch alternates between the two
PCs and displays them on the monitor. Each PC can be displayed at 5, 10, 15, or 20
seconds: