Diodes PD3S230H - Manual

PD3S230H
Document number: DS31752 Rev. 1 - 2
1 of 3
www.diodes.com
April 2009
© Diodes Incorporated
PD3S230H
PowerDI is a registered trademark of Diodes Incorporated.
NEW PROD
UC
T
2.0A SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
PowerDI
®
323
Features
• Ultra-Small Surface Mount Package
• Guard Ring Die Construction for Transient Protection
•
High Surge Capability
•
Lead Free Finish, RoHS Compliant (Note 1)
• "Green" Molding Compound (No Br, Sb)
• Qualified to AEC-Q101 Standards for High Reliability
Mechanical Data
• Case: PowerDI ® 323
• Case Material: Molded Plastic, “Green” Molding Compound.
UL Flammability Classification Rating 94V-0
• Moisture Sensitivity: Level 1 per J-STD-020D
•
Polarity: Cathode Band
•
Terminals: Finish - Matte Tin annealed over Copper
leadframe. Solderable per MIL-STD-202, Method 208
• Marking Information: See Page 3
•
Ordering Information: See Page 3
•
Weight: 0.006 grams (approximate)
Maximum Ratings
@T
A
= 25°C unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitance load, derate current by 20%.
Characteristic Symbol Value Unit
Peak Repetitive Reverse Voltage
Working Peak Reverse Voltage
DC Blocking Voltage V
RRM
V
RWM
V
R
30 V
Average Forward Current (See also figure 4) I
F(AV)
2.0 A
Non-Repetitive Peak Forward Surge Current 8.3ms
Single Half Sine-Wave Superimposed on Rated Load
I FSM
30 A
Thermal Characteristics
Characteristic Symbol Typ Max Unit
Thermal Resistance Junction to Soldering Point R θJS
⎯ 6 °C/W
Thermal Resistance Junction to Ambient Air (Note 2) @ T
A
= 25 °C
R θJA 177 ⎯ °C/W
Thermal Resistance Junction to Ambient Air (Note 3) @ T A = 25
°C
R θJA 128 ⎯ °C/W
Operating and Storage Temperature Range T
J
, T
STG
-65 to +150 °C
Electrical Characteristics
@T
A
= 25°C unless otherwise specified
Characteristic Symbol Min Typ Max Unit Test Condition
Reverse Breakdown Voltage (Note 4) V
(BR)R
30 ⎯ ⎯ V I
R
= 100 μA
Forward Voltage V
F
⎯
⎯ ⎯
0.50
0.60
0.55
V
I
F
= 2.0A, T
A
= 25 °C
I
F
= 2.0A, T
A
= 125 °C
Leakage Current (Note 4) I
R
⎯
⎯
0.7
10
⎯
100
μA
V
R
= 5V, T
A
= 25 °C
V
R
= 30V, T
A
= 25 °C
Total Capacitance C
T
⎯ 40 ⎯ pF V
R
= 10V, f = 1.0MHz
Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at http://www.diodes.com/products/lead_free.html.
2. FR-4 PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
3. Polymide PCB, 2 oz. Copper, minimum recommended pad layout per http://www.diodes.com/datasheets/ap02001.pdf.
4. Short duration pulse test used to minimize self-heating effect.
Top View
Please click here to visit our online spice models database.