Daily use, 1 using the detergent, 2 setting and starting a programme setting mode – AEG F55000 VI0P User Manual

Page 25: Starting a programme without delay start, Starting a programme with delay start

Advertising
background image

7. DAILY USE

1. Open the water tap.
2. Press the on/off button to activate

the appliance. Make sure that the ap-
pliance is in setting mode, refer
to ’SETTING AND STARTING A PRO-
GRAMME’.
• If the salt indicator is on, fill the salt

container.

• If the rinse aid indicator is on, fill

the rinse aid dispenser.

3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme

for the type of load and the degree
of soil.

7.1 Using the detergent

20

30

M AX

1

2

3

4

+

-

A

B

C

1.

Press the release button (B) to open
the lid (C).

2.

Put the detergent in the compart-
ment (A) .

3.

If the programme has a prewash
phase, put a small quantity of deter-
gent on the inner part of the appli-
ance door.

4.

If you use detergent tablets, put the
tablet in the compartment (A).

5.

Close the lid. Make sure that the re-
lease button locks into position.

7.2 Setting and starting a
programme

Setting mode

The appliance must be in setting mode
to accept some operations.
The appliance is in setting mode when,
after the activation:
• All the programme indicators come

on.

If the control panel shows other condi-
tions, press and hold function buttons
(B) and (C) at the same time until the ap-
pliance is in setting mode.

Starting a programme without
delay start

1. Open the water tap.
2. Press the on/off button to activate

the appliance. Make sure that the ap-
pliance is in setting mode.

3. Set the programme.

• The related programme indicator

comes on.

• The programme duration flashes in

the display.

4. Close the appliance door. The pro-

gramme starts.
• If you open the door, the display

shows the programme duration
that decreases with steps of 1 mi-
nute.

Starting a programme with
delay start

1. Set the programme.
2. Press the delay button again and

again until the display shows the de-
lay time you want to set (from 1 to 24
hours).
• The delay time flashes in the dis-

play.

• The delay indicator is on.

3. Close the appliance door. The count-

down starts.
• If you open the door, the display

shows the countdown of the delay
start that decreases with steps of 1
hours.

ENGLISH

25

Advertising
This manual is related to the following products: