Xoro HRT 5000 - Manual (Page 54)

14 HRT 5000
Engl
ish
Connection
Connect the Coaxial cable for transmission of
digital Audio signals to your playback device or
your amplifier. Enjoy the more realistic sound by
connecting an amplifier and speaker system.
1. Switch off the device and unplug the power
connection n of the DVB-T receiver and
amplifier.
2. Insert the audio plug into the socket on the
right-hand side of the device.
3. Plug the Audio jack into the corresponding
socket on your playback device or your
amplifier.
4. Install a video connection to a TV set.
5. Switch on the DVB-T receiver and the amplifier. Select the audio input by the amplifier.
Note:
•
The cable is not part of the accessories.
• Some of the broadcast’s offers digital audio (AC3), but not all.
• The different audio track during DVB-T broadcast you can switch by using the AUDIO button
on the remote control.
Second SCART output
You can also use the second SCART output to
record the broadcast on a VCR. Connect to the
VCR with a SCART cable to the VCR output of
the HRT 5000.
For more information, see the instructions for
operating the VCR.
SCART Input
You can use the second SCART port as an input to transmit the video and audio signals to a TV.
Connect a VCR or DVD player with a SCART cable to the VCR SCART connector of HRT 5000.
To activate the input press the DTV/VCR button. To switch off the SCART input function, press the
DTV/VCR button again.
Notes:
1.
If the SCART input is active, the HRT 5000 no function than transmit the signals.
2. Stop the SCART input by pressing the DTV/VCR button.
To external decoder or amplifier
Second SCART port (VCR)