Braun FG1100 Silk Epil - Manual (Page 6)

6
Thank you for purchasing the Braun
SilkFinish Precision Hair Remover which
precisely and safely removes unwanted
hairs from body, face and bikini area. We
hope you will enjoy using the appliance.
Please read the use instructions carefully
and thoroughly before using it.
Important
Keep the appliance out of the reach of
children.
For hygienic reasons, do not share this
appliance with other persons.
Do not use the appliance on irritated or
inflamed skin.
Never use the appliance with a damaged
cutting head.
Description
1 Protective cap
2 Precision cutting head
3 Bikini zone cutting head
3a Bikini zone trimming comb, 5 mm
3b Bikini zone trimming comb, 8 mm
4 On/off switch «1/0»
5 Battery
compartment cover
6 Brush
Inserting the battery
This appliance operates with one AAA
1.5 V battery. For best performance, use
an alkaline manganese battery (type
LR03, AM4, AAA, e.g. Duracell). This
battery provides a shaving capacity of
approximately 120 minutes. Frequent use
of the bikini zone cutting head (3) will
reduce the operation time.
Make sure the appliance is turned off.
Remove the battery compartment cover
(5) by pulling downwards (a).
Insert the battery with the (+) and (–)
poles in the direction marked.
Close the battery compartment. •
•
•
•
Note: If the appliance is not used for long
periods of time, do not leave the battery
inserted (danger of leakage). Take an
expired battery out of the appliance
immediately.
Used batteries should not be
disposed of with the household
waste. Please dispose of them at
special collection points or return
them to your retailer or authorised
service centres.
Using the cutting heads
The Braun SilkFinish comes with different
cutting heads that are uniquely contoured
to remove unwanted hairs on every curve
of your body, face and bikini area.
Getting started
Remove the protective cap (1).
Slide the on/off switch (4) up to turn the
appliance on.
Place the cutting head near to the hair
to be removed and guide it slowly
against the direction of hair growth.
For optimum results, pull the skin taut
with one hand while using.
Turn the appliance off before changing
the cutting heads.
To remove the cutting head, rotate it
counter-clockwise 90°, then lift it (b).
To attach another one, insert it into the
opening, then rotate 90° clockwise until
it clicks into place.
The precision cutting head (2) is perfect
for detailing of eyebrows and removal of
stray hairs on all body areas.
The bikini zone cutting head (3) is ideally
suited for use in the bikini area to cut
precise lines or contours like the bikini
line.
•
•
•
•
•
English
5364418_FG1100_MN_S4-.indd 6 5364418_FG1100_MN_S4-.indd 6 17.01.2007 8:38:56 Uhr 17.01.2007 8:38:56 Uhr