C how to epilate – Braun 3270-5319 Silk-épil SoftPerfection Easy Start User Manual

Page 11

Advertising
background image

12

• Insert the gel pack underneath the

glove’s transparent foil. Use only with
glove.

• Put transparent (cool) side of the glove

on your leg.

• Start cooling for approx. 1/2 minute,

longer if needed.

• Epilate the cooled skin area immedi-

ately as described in section «C».

• Repeat cooling and epilating until

completion.

• While epilating, please ensure your skin

is dry.

Important: Apply cooling glove to the
same area for no longer than 2 minutes.
Keep away from sunlight. Do not use
gel pack when damaged. Dispose of in
household waste. Do not use if you are
hypersensitive, allergic to the cold, or
if your skin suffers from sensory disturb-
ances, when suffering from cardiac dis-
eases or arterial circulatory disorders.

Preparing the appliance

• Before starting off, thoroughly clean

the epilation head you want to use
(

B

or

b

).

• To remove the epilation head, press the

release buttons

3

on the left and right

and pull it off.

• Click the desired head into place:

– Choose the starter epilation head

b

if you are epilating for the first time or
if you have very sensitive skin.

– Once your skin is used to epilation,

you may switch to the standard
epilation head

B

which allows a

more efficient and faster epilation
thanks to its greater number of
tweezers.

• Make sure that the 4-way moving pain

softener is in place.

• Plug the cord connector

6

into the

socket

5

and plug the transformer

plug

7

into an electrical outlet.

C How to epilate

1 To turn on the appliance, slide switch

4

to setting «2»

(«2» = normal speed,

«1» = reduced speed).

2 Rub your skin to lift short hairs.

For optimum performance hold the
appliance at a right angle (90°) against
your skin. Guide it in a slow, continuous
movement without pressure against
the hair growth, in the direction of the
switch. The SoftLift™ tips will make
sure that even flat lying hair is lifted and
removed thoroughly at the root.
As hair can grow in different directions,
it may also be helpful to guide the
appliance in different directions to
achieve optimum results.
Both rollers of the 4-way moving pain
softener should always be kept in
contact with the skin, allowing the
pulsating movements to stimulate and
relax the skin for a gentler epilation.

3 Leg epilation

Epilate your legs from the lower leg in
an upward direction. When epilating
behind the knee, keep the leg stretched
out straight.

4 Underarm and bikini line epilation

Please be aware that especially at the
beginning these areas are particularly
sensitive to pain. With repeated usage
the pain sensation will diminish. For
more comfort, ensure that the hair is
at the optimum length of 2–5 mm.
Before epilating, thoroughly clean the
respective area to remove residues (like
deodorant). Then carefully dab dry with
a towel. When epilating the underarm,
keep your arm raised up so that the skin
is stretched and guide the appliance in
different directions.

5318473_SE2370_P6-112 Seite 12 Mittwoch, 1. Dezember 2004 9:13 09

Advertising
This manual is related to the following products: