The fcc rf safety requirement – Acer Veriton M410 User Manual

Page 34

Advertising
background image

5 Regulations and safety notices

25

English

The FCC RF safety requirement

The radiated output power of the wireless LAN Card and Bluetooth card is far
below the FCC radio frequency exposure limits. Nevertheless, the PC series shall
be used in such a manner that the potential for human contact during normal
operation is minimized as follows:
1

Users are requested to follow the RF safety instructions on wireless option
devices that are included in the user's manual of each RF option device.

Caution: To comply with FCC RF exposure compliance
requirements, a separation distance of at least 20 cm (8 inches)
must be maintained between the antenna for the integrated
wireless LAN Card and all persons.

Note: The Acer wireless adapter implements a transmission
diversity function. The function does not emit radio frequencies
simultaneously from both antennas. One of the antennas is
selected automatically or manually (by users) to ensure good
quality radiocommunication.

Canada — Low-power license-exempt radio
communication devices (RSS-210)

a

Common information
Operation is subject to the following two conditions:
1. This device may not cause interference, and
2. This device must accept any interference, including interference
that may cause undesired operation of the device.

b

Operation in 2.4 GHz band
To prevent radio interference to the licensed service, this device is
intended to be operated indoors and installation outdoors is subject
to licensing.

c

Operation in 5 GHz band

Advertising