Acer TravelMate P645-V - Manual (Page 85)

73
Englis
h
The FCC RF safety requirement
The radiated output power of the wireless LAN Mini PCI Card and Bluetooth card is far below the FCC
radio frequency exposure limits. Nevertheless, the computer shall be used in such a manner that the
potential for human contact during normal operation is minimized as follows:
1. Users are requested to follow the RF safety instructions on wireless option devices that are
included in the user's manual of each RF option device.
Caution: To comply with FCC RF exposure
compliance requirements, a separation distance
of at least 20 cm (8 inches) must be maintained
between the antenna for the integrated wireless
LAN Mini PCI Card built in to the screen section
and all persons.
Note: The wireless Mini PCI adapter implements a
transmission diversity function. The function does
not emit radio frequencies simultaneously from both
antennas. One of the antennas is selected
automatically or manually (by users) to ensure good
quality radiocommunication.
1. This device is restricted to indoor use due to its
operation in the 5.15 to 5.25 GHz frequency
range. FCC requires this product to be used
indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interference
to co-channel Mobile Satellite systems.
2. High power radar is allocated as the primary user of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz
bands. These radar stations can cause interference with and/or damage this device.
3. An improper installation or unauthorized use may cause harmful interference to radio
communications. Also any tampering of the internal antenna will void the FCC certification and
your warranty.
C ANADA — L OW - POWER LICENSE - EXEMPT RADIO COMMUNICATION DEVICES (RSS-210)
Exposure of humans to RF fields (RSS-102)
The computer employs low gain integral antennas that do not emit RF field in excess of Health Canada
limits for the general population; consult Safety Code 6, obtainable from Health Canada's website at
www.hc-sc.gc.ca/rpb.
This device complies with RSS210 of Industry Canada.
This Class B digital apparatus complies with Canadian ICES-003, Issue 4, and RSS-210, No 4 (Dec
2000) and No 5 (Nov 2001).
"To prevent radio interference to the licensed service, this device is intended to be operated indoors
and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is
installed outdoors is subject to licensing."
Cet appareil numérique de la classe B est conforme à la norme NMB-003, No. 4, et CNR-210, No 4
(Dec 2000) et No 5 (Nov 2001).
« Pour empêcher que cet appareil cause du brouillage au service faisant l'objet d'une licence, il doit
être utilisé a l'intérieur et devrait être placé loin des fenêtres afin de fournir un écran de blindage
maximal. Si le matériel (ou son antenne d'émission) est installé à l'extérieur, il doit faire l'objet d'une
licence.
Caution: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use due to its
operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used
indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful
interference to co-channel mobile satellite systems. High power radar is allocated as the primary user
of the 5.25 to 5.35 GHz and 5.65 to 5.85-GHz bands. These radar stations can cause interference with
and/or damage to this device.
The maximum allowed antenna gain for use with this device is 6 dBi in order to comply with the E.I.R.P
limit for the 5.25- to 5.35 and 5.725 to 5.85 GHz frequency range in point-to-point operation.
Ver.: 01.01.01