Acer X193W - Manual (Page 12)

EN-11
X193W
Standard Timing Table
Mode Resolution
1 VGA 720 x 400 70 Hz
2 VGA 640 x 480 59.94 Hz
3 MAC 640 x 480 66.66 Hz
4 VESA 640 x 480 72 Hz
5 VESA 640 x 480 75 Hz
6 648 x 500 57.7 Hz
7 VESA 800 x 600 56.25 Hz
8 VESA 800 x 600 60 Hz
9 VESA 800 x 600 72 Hz
10 VESA 800 x 600 75 Hz
11 MAC 832 x 624 74.55 Hz
12 VESA 1024 x 768 60 Hz
13 VESA 1024 x 768 70 Hz
14 VESA 1024 x 768 75 Hz
15 VESA 1152 x 864 75 Hz
16
17
VESA 1280 x 1024 60 Hz
18
VESA 1280 x 1024 75 Hz
19
CVT 1440 x 900 60 Hz
To reduce the need for adjustment for different modes, the monitor has
default setting modes that are most commonly used as given in the table
below. For optimum adjustment, the user is suggested to perform the
Auto Setup under Windows “Full Screen“ pattern or using the pattern in
the floppy disk provided. When none of the mode is matched, the user can
store their preferred modes in the user modes. The monitor is capable of
storing up to 9 user modes. The only condition to store as a user mode is
the new display information must have 1 KHz difference for horizontal
frequency or 1 Hz for vertical frequency or the sync signal polarities are
different from the default modes.
0 75 Hz CVT 1440 x 90