Description, Charging, General hair cutting information – Braun CruZer5 Head User Manual

Page 6

Advertising
background image

6

This appliance is designed for household use only.

Description

1

Hair clipping comb 3 – 24 mm

2 Cutting

system

3 Length

selector

4

On/off switch with charge indicator

5 Cord

socket

6

Special cord set

Charging

The best environmental temperature for charging is between 60 °F to 95 °F /
15 °C to 35 °C. Do not expose the appliance to temperatures higher
than 122 °F / 50 °C for extended periods of time.
Using the special cord set (6), connect the appliance to an electrical outlet

with the motor switched off.

When charging for the first time or when the appliance is not used for a few

months, leave the appliance to charge continuously for at least 8 hours.

Once the appliance is completely charged, discharge it (until empty)

through normal use. Then recharge to full capacity. Maximum capacity
will only be reached after several charging/discharging cycles.

A full charge provides at least 40 minutes of cordless operating time.

This may vary depending on the hair you are trimming.

If the rechargeable batteries are discharged, you may also use the

appliance by connecting to an electrical outlet via the special cord set.

Charge indicator
The charge indicator integrated in the on/off switch (4) shows the charging
status of the batteries. During charging the symbol in the on/off switch
lights up permanently green. When the battery is fully charged, the charge
indicator turns off.

General hair cutting information

The hair should be clean, well combed, tangle-free and dry.
If you are not used to clipping hair, begin with a higher setting and then

reduce the setting to avoid cutting more hair than desired.

92390604_cruzer5hair_NA_S4-30.indd 6

92390604_cruzer5hair_NA_S4-30.indd 6

05.11.12 15:57

05.11.12 15:57

Advertising