Acer TravelMate 2310 - Manual (Page 28)

20
English
Restore without a Recovery CD
This recovery process helps you restore the C: drive with the original
software content that is installed when you purchase
your notebook.
Follow the steps below to rebuild your C: drive. (Your C: drive will be
reformatted and all data will be erased.) It is important to back up all
data files before you use this option.
Before performing a restore operation, please check the BIOS settings.
1 Check to see if Acer disk-to-disk recovery is enabled or not.
2 Make sure the [D2D Recovery] setting in [Main] is [Enabled].
3 Exit the BIOS setup utility and save changes. The system will
reboot.
Note: To activate BIOS setup utility, press <F2> during POST.
1 Restart the system.
2 While the Acer logo is showing, press <Alt>+<F10> at the same
time to enter the recovery process.
3 Refer to screen instructions to perform system recovery.
Important: This feature occupies 2 - 3 GB in a hidden partition on
your hard drive.