I. introduction and safety, Introduction – Bell & Gossett IM214R01 20GDS User Manual

Page 4

Advertising
background image

2

15GDS/20GDS Installation, Operation and Maintenance Manual

I. Introduction and Safety

Introduction

Description

This manual provides instructions for the Installation, Operation and Maintenance of the
Bell & Gossett 15GDS/20GDS pumps.

Requirement

This manual must be read and understood before installation and start-up. Bell & Gossett
shall not be liable for physical injury, damage or delays caused by a failure to observe the
instructions for installation, operation and maintenance contained in this manual.

Content

This instruction manual covers several different pump models that all have similar power
end configurations. Most assembly, disassembly and inspection procedures are the same for
all the pumps. However, where there are differences, they are called out separately within

the manual. The design, materials and workmanship incorporated in the construction
of Bell & Gossett makes them capable of giving long, trouble free service. The life and
satisfactory service of any mechanical unit, however, is enhanced and extended by correct
application, proper installation, periodic inspection, condition monitoring and careful
maintenance. This instruction manual was prepared to assist operators in understanding the
construction and the correct methods of installing, operating and maintaining these pumps.

Key Topics

Data Plate Interpretation

Product Description
General Design
Installation
Electrical Connections
Cable Chart
Transportation and Storage
Operation
Care and Maintenance
Oil Change

Introduction and Safety

Advertising
This manual is related to the following products: