YSI 650 MDS - Manual (Page 22)

YSI Incorporated 22 650 MDS
2.11 UPGRADING ECOWATCH FOR WINDOWS SOFTWARE
To utilize the full capability of the 650 MDS, you will need to upgrade your version of EcoWatch for
Windows from the YSI World Wide Web page (www.ysi.com). Access the YSI Environmental Web Page,
select “tech support” from the header, and then “Downloads”. After registration, select the EcoWatch for
Windows upgrade entry and follow the instructions provided. After the upgrade is complete, your
software version (viewed from the EcoWatch toolbar entry Help|About EcoWatch) should be 3.13.00 or
higher.
If you encounter difficulties in the upgrade procedures, contact YSI Customer Service for advice.
After reading the above sections and participating in the simple examples provided, you should be familiar
with the basics of battery installation, keypad and display function, and keypad data entry. Please proceed
to Section 3 where the setup of your 650 is described in detail.
SECTION 3 SETTING UP THE 650
The 650 has a number of features which are user-selectable or which can be configured to meet the user’s
preferences. Most of these choices and selections are found in the System setup selection in the Main 650
Menu. To explore the various setup possibilities of the 650, turn the instrument on, select System setup,
and press Enter. The following display will appear. The second display can be observed by scrolling to
the bottom of the System setup entries with the down arrow.
Sonde Icon