YSI EC30A - Manual

EcoSense ® EC30A Conductivity*/TDS/Temperature
Pen
Operations Manual
EcoSense EC30A OVERVIEW
A. Description
1. Battery cap
2. Graphic LCD screen
3. Keypad
4. Belt clip (Do not remove screw.)
5. Electrode collar
6. Electrode & ATC assembly
(Electrode cap shown covering electrode.)
B. EcoSense EC30A Keypad Layout
On/Off key
Hold key
Calibration key
Mode key
INITIAL INSPECTION AND ASSEMBLY
Carefully unpack the instrument and accessories, and inspect for shipping damages. Notify
your local dealer or YSI immediately (+1 937-767-7241 or [email protected]) of any
damages or missing parts. Save packing materials until satisfactory operation is confirmed.
BEFORE USING
A. Insert the Batteries
1. Remove the battery cap at the top of the unit.
2. Insert the set of batteries (included) ensuring correct polarities.
3. Securely replace battery cap.
B. Soak the Electrode
1. Remove the electrode cap covering the EC30A meter electrode.
2. Soak electrode in distilled water for 10 minutes before first use or after storage .