3 deleting a link with an output, Deleting a link with an output -4, Section 4.3) – YSI IQ S ENSOR N ET MIQ/CHV PLUS User Manual
Page 20
Settings
MIQ/CHV PLUS
4 - 4
ba76036e01
01/2012
4.3
Deleting a link with an output
If a link of a valve output with a sensor is no longer required, the link
can be deleted.
The following steps describe operation with the 2020 XT system. With
the System 182 (XT), the valve output of the MIQ/CHV PLUS can be
found directly under the Settings menu (see system operating manual
of the DIQ/S 182).
Fig. 4-3
150 - Settings of outputs and links: Erase link
1
Open the Settings menu with
s
.
2
Using
d
and
g
, select and confirm the menu item, System
settings -> Settings of outputs and links.
The Settings of outputs and links display opens.
3
Highlight the column with
d
and confirm with
g
.
4
Highlight an output with
d
and confirm with
g
.
5
Select Erase link with
d
and confirm with
g
.
A security prompt appears.
6
Select Erase link with
d
and confirm with
g
.
The link is deleted.