4 setting the valve output, Setting the valve output -5, Section 4.4 – YSI IQ S ENSOR N ET MIQ/CHV PLUS User Manual
Page 21: See section 4.4)
MIQ/CHV PLUS
Settings
4 - 5
ba76036e01
01/2012
4.4
Setting the valve output
The following steps describe operation with the 2020 XT systems. With
the System 182 (XT), the valve output of the MIQ/CHV PLUS can be
found directly under the Settings menu (see system operating manual
of the DIQ/S 182).
Fig. 4-4
150 - Settings of outputs and links
1
Call up the measured value display with
m
.
2
Open the Settings menu with
s
.
3
Highlight the Settings of outputs and links menu item with
d
and confirm with
g
. The Settings of outputs and links display
appears.
4
Highlight the Feature column with
d
and confirm with
g
.
5
Highlight a line for the valve output (Cx) in the Feature column
with
d
and confirm with
g
.
The Settings of outputs and links display opens.
6
Highlight the Valve function menu item with
d
and confirm
with
g
.
7
Select one of the functions in the following list with
d
and
confirm with
g
.