YSI IQ S ENSOR N ET MIQ/CHV PLUS - Manual (Page 27)

MIQ/CHV PLUS Settings
4 - 11 ba76036e01 01/2012
4.5 Checking the status of the outputs
This function offers a simple overview of the states of all outputs.
The open or closed state is displayed for each valve.
With the System 182 XT, you can recall the states of the outputs via the
measured value and status display (see system operating manual of
the DIQ/S 182 XT).
With the 2020 XT system, the function, Status of output channels, in
the menu, Settings/Service/List of all components can be accessed as
follows:
Fig. 4-6 394 - Status of output channels
1 Call up the measured value display with
m
.
2 Open the Settings menu with
s
.
3 Highlight the Service menu item with
d
and confirm with
g
.
The Service dialog box opens.
4 Highlight the List of all components menu item with
d
and
confirm with
g
.
The List of all components dialog box opens.
5 Select the required component (column Model, entry MIQCHV
PL) with
d
and confirm with
g
.
The Status of output channels window opens.
6 Using
m
or
e
, exit the Status of output channels window.