Braun 3570 Silk-épil SoftPerfection Body Epilation - Manual (Page 7)

8
hair growth, in the direction of the
switch. The SoftLift™ tips will make
sure that even flat lying hair is lifted and
removed thoroughly at the root.
As hair can grow in different directions,
it may also be helpful to guide the
appliance in different directions to
achieve optimum results.
Both rollers of the 4-way moving pain
softener
should always be kept in
contact with the skin, allowing the
pulsating movements to stimulate and
relax the skin for a gentler epilation.
If you are used to epilation and look for
a faster way to efficiently remove hair,
please use the EfficiencyPro clip
.
Placed on the epilation head instead
of the 4-way moving pain softener, it
allows maximum skin contact and
ensures optimum usage so that more
hairs are removed in one stroke.
3 Leg epilation (epilation head with
4-way moving pain softener or
EfficiencyPro clip ):
Epilate your legs from the lower leg in
an upward direction. When epilating
behind the knee, keep the leg stretched
out straight.
4 Underarm and bikini line epilation
(underarm epilation head without
attachment):
For this specific application, the narrow
underarm epilation head has been
developed. Thanks to its specific
design adapted to the contours of
these areas, it provides a gentle and
thorough epilation.
Please be aware that especially at the
beginning these areas are particularly
sensitive to pain. With repeated usage
the pain sensation will diminish. For
more comfort, ensure that the hair is
at the optimum length of 2–5 mm.
Before epilating, thoroughly clean the
respective area to remove residue (like
deodorant). Then carefully dab dry with
a towel. When epilating the underarm,
keep your arm raised up so that the skin
is stretched and guide the appliance in
different directions.
As skin may be more sensitive directly
after epilation, avoid using irritating
substances such as deodorants with
alcohol.
Cleaning the epilation heads
5 After epilating, unplug the appliance
and clean the epilation head used:
If you have used attachments
or ,
first remove it and clean it with the
brush.
6 To clean the tweezer element, use the
cleaning brush dipped into alcohol.
Turn the product around and clean the
tweezers with the brush while turning
the barrel manually.
7 Remove the epilation head by pressing
the release buttons on the left and
right and pull it off.
Give the top of the housing a quick
clean with the brush. Place the epila-
tion head and the 4-way moving pain
softener back on the housing.
Subject to change without notice.
This product conforms to the
EMC-Directive 89/336/EEC and
to the Low Voltage Regulation
73/23 EEC.
1a
1b
2
2
1a
1b
8
1a 1b
3
5318407_Bodyepilation_S6- Seite 8 Mittwoch, 15. Oktober 2003 11:32 11