AEG A61900HLW0 - Manual (Page 31)

Problem Possible cause Solution
The appliance does not
work at all. Neither cool-
ing nor lighting works.
Plug is not connected to the
mains socket properly.
Connect the mains plug properly.
Power does not reach the appli-
ance.
Try connecting another electrical
device to the power outlet.
The appliance is not switched
on.
Switch on the appliance.
There is no voltage in the mains
socket (try to connect another
appliance into it).
Call an electrician.
Customer Service
If your appliance is still not working properly after making the above checks, contact the
nearest service centre.
To obtain fast service, it is essential that when you apply for it you specify the model and
serial number of your appliance which can be found either on the guarantee certificate or
on the rating plate located on the external right side of the appliance.
Replacing the lamp
1. Disconnect the mains plug from the
mains socket.
2. Replace the used lamp with a new lamp
of the same power and specifically de-
signed for household appliances. (the
maximum power is shown on the lamp
cover)
3. Connect the mains plug to the mains
socket.
4. Open the lid. Make sure that the lamp
comes on.
WARNING!
Do not remove the lamp cover at the time of replacement.
Do not operate the freezer if the lamp cover is damaged or missing.
TECHNICAL DATA
Dimensions Height × Width × Depth (mm): Further technical information are situ-
ated in the rating plate on the external
right side of the appliance.
876 Ч 946 Ч 665
Rising Time 46 hours
Technical data 31