Xylem Resvari Booster Set Variable Speed - Manual

Resvari Booster Set
Variable Speed
1
Operating and Maintenance Instructions
Declaration of conformity
Declaration of conformity
Lowara pumps UK declare that the Domestic Booster set conforms to the requirements of the Machinery Safety
Directive
98/37/EEC.
Conforming to the UK Health & Safety Requirements S.I. 1992 No 3073 S.I. 1994 No 2063
Water supply (Water fittings) regulations 1999
Simple pressure vessel directive 87/404/EEC
Signed: Position: Engineering manager Date:17-02-12 Revision B
Clive Willmot t
Introduction
This leaflet contains information to enable the safe installation and operation of the products mentioned above.
The following instructions must be read and understood by all persons responsible for the installation, operation
and maintenance of this product.
Warning Symbols
Safety instructions where noncompliance would affect safety.
Safety instruction where electrical hazard is involved.
Safety instruction where noncompliance could cause damage to the equipment.
Instruction for safe use
This product has been designed for boosting cold water in potable water installations to the operating conditions
shown.
This product should not be installed until this leaflet has been studied carefully.
Handling, transportation and installation of this equipment should only take place with the proper
use of lifting equipment.
This product must be stored in a frost-free dry environment.
Noise Emissions
This equipment operates at a noise level lower than 70dBA.
resvari vs booster set o and m instructions:Layout 1 09/05/2012 16:18 Page 1