Xylem MM 107B Model AS-5S Ambient Remote Sensor - Manual (Page 2)

Exploded View
Disassemble the Sensor to Install Probes
B
A
Cover
Tightening screw mounting holes
Wiring terminal
screw
Tightening screw
Case
Base
Nozzle
a. Remove the case cover (A).
b. Insert a flat bladed screwdriver (B) into one of
the two slots on the cover and twist the
screwdriver. Repeat this step on the other slot.
E C x 2
D
Remove the case (C) from the base (D) by
loosening the two screws (E) and lift off.
2