Xylem PDA - Manual (Page 11)

Global Water
800-876-1172
• globalw.com
- 11 -
Alarms Setup:
This screen allows the alarm start and stop times to be
set and enabled. Enable the
alarm timers by touching the box
next to them. When the start
alarm is enabled, the logger will
begin logging on the next
occurrence of that time. The
stop timer will halt the logger on
the next occurrence of the stop
time after the logger has been
started.
Use caution when using these
timers. Inadvertently enabling
them may cause data to be lost.
Analog Channels Setup:
The Analog Channel setup menu is where the
calibration and display information is entered
for each of the analog input channels. As with
the bar graph display in the main screen, the
screen is too small to display all the information
at once so only a single channel is displayed at
a time. The blue box in the upper left corner of
the screen indicates which channel’s information
is shown. Switch from one channel to another by
touching the appropriate channel number in the
bar at the top of the screen.
Consult the data logger manual or online help
files in the desktop software for a detailed
description of the fields in this screen and how
to calibrate the analog channels.