Xylem MultiLab User - Manual (Page 6)

O
PERATION
M
ULTI
L
AB
U
SER
6
ba75920d01 03/2011
8. Edit the user list (see 3.2 User administration, page 7).
9. Send the list of users to the meter with Send .
A progress bar is displayed while the data are being transmitted. The
meter will then restart.
10. Activate the user administration in the meter with Activate .
A progress bar is displayed while the data are being transmitted. The
meter will then restart. The Login menu is displayed.
Before you can measure with the meter, first select a user name and enter
a password as necessary.
NOTE:
If you use the MultiLab User program for the first time:
• Enter a new password here.
This password is assigned to the user name, Admin P.
It enables access to the meter with the user name
Admin P and access to the user administration on the
PC.
• Confirm with OK.
A window for the password repetition pops up.
• Enter the password once again and confirm with OK.
The query,
Create a new list of users in the meter? An
existing list in the meter is removed! pops up.
• Confirm with OK.
The list of users is created on the meter and displayed
on the PC.
The list includes the user name, Admin P and the pass-
word entered.