3 working with wtw multilab® importer, 3working with wtw multilab, Importer – Xylem WTW MultiLab Importer User Manual
Page 7
WTW MultiLab
®
Importer
Working with WTW MultiLab
®
Importer
7
ba75894e01
02/2010
3
Working with WTW MultiLab
®
Importer
1
Open a spreadsheet with Excel.
2
Connect the meter to the PC via the USB interface.
3
Switch on the meter.
4
In the spreadsheet, highlight the cell where the data should be
inserted. Starting from this cell, the data table will be inserted
downwards and to the right.
5
In the tool bar, click the button, Import data. After a short search the
WTW MultiLab
®
Importer program displays the detected meter in the
transmission window: The WTW MultiLab
®
Importer is ready for data
import.
6
Start outputting the desired measured values to the USB interface on
the meter. The required operating steps on the meter are given in the
meter operating manual.
After the data output is started, the data are transferred to the Excel
sheet. Measurement datasets are entered as a table with
corresponding column headings. Calibration data are entered as a
text field above the table. The transmission window remains open
after the data transfer is finished.