Program guide – Extron Electronics AVT 200HD User Guide User Manual
Page 44
AVT 200HD Tuner • Operation
38
Program Guide
The translucent program guide display provides a list of the programs available on the
current channel for the day.
Figure 34.
Program Guide Example
•
To display the program guide, do any of the following:
•
Press the Guide button on the IR remote control.
•
Click the
Prog
Guide
ON
button on the
Control
tab of the
. The button turns green when the Program Guide is enabled.
•
Click the
Program
Guide
On
button on the
Control
•
Enter the E
1TVPG
SIS command.
•
To select a program using the program guide, press the up and down Shift arrow
buttons on the remote control to move the highlighting through the program list. When
a program is highlighted, the name, time period, and a brief description of the program
are displayed to the left of the program list. You can also enter SIS commands to move
the highlighting up (E
+TVPG
) or down (E
–TVPG
) through the program list.
•
To close the program guide, do one of the following:
•
Press the Guide button on the remote control again.
•
Click the
Prog
Guide
ON
button again to remove the green highlighting (control
software).
•
Click the
Program
Guide
Off
button on the User Control web page.
•
Enter the SIS command E
0TVPG
.
NOTE: When you adjust the volume or change the channel (using any method), the
Program Guide closes.