Extron Electronics FOX Matrix 7200 User Manual

Page 94

Advertising
background image

Tools menu

•

Assign Device Icons — Displays the complete set of

input and output device icons. You can drag any of these
icons to the input and output boxes.

•

Edit Device Palette — Allows you to add your own

device icon graphics.

•

Mute-Outputs settings — Displays the Mute Adjust

window, from which you can mute each output.

•

FOX Re-clocker settings — Displays the FOX

Reclocking Rate Settings window, from which you can
select the reclocking rate for one or all outputs and mute
and unmute the output.

•

View Input Frequencies — Displays the Input

Detection window, which shows the data rates for SDI
and HD‑SDI inputs only. This selection is not available if
no BNC 3G/HD/SD‑SDI boards are installed.

•

Update Firmware ... — Allows you to replace the

firmware that is coded on the control board of the switcher without taking the switcher
out of service (see

Updating the firmware

on page 80).

•

IP Options — Allows you to set IP options (see

IP Settings/Options window

on

page 76).

•

HTML File Manager — Displays a list of HTML files installed on the switcher and

allows you to upload custom files from a PC connected to the switcher (see

Uploading

HTML files

on page 84).

•

Hardware Status — Provides an overall view of the status of the matrix

switcher, including the power supply voltages, the temperature status, the
Remote RS‑232/RS‑422 port configuration, and the installed and updated firmware
status (see figure 44).

Proper operation.
Component has failed.

Figure 44.

Status Window

FOX Matrix 3200 and 7200 Switchers • Matrix Software

86

Advertising
This manual is related to the following products: